Odaberi državu za dostavu paketa

Laney IRF120-212 Gitarsko combo pojačalo

Kod proizvoda: 1329424

Laney IRF120-212 Gitarsko combo pojačalo

Kod proizvoda: 1329424

The Laney IRF120-212 is the flagship Ironheart Foundry combo — a 120-watt solid-state amplifier built around an offset 2×12" cabinet loaded with custom HH H1260 loudspeakers. Two fully independent channels, each with its own 3-band passive EQ, deliver the dynamic touch response of the Ironheart tube series without the maintenance. LA·IR…

Laney IRF120-212 Gitarsko combo pojačalo

The Laney IRF120-212 is the flagship Ironheart Foundry combo — a 120-watt solid-state amplifier built around an offset 2×12" cabinet loaded with custom HH H1260 loudspeakers. Two fully independent channels, each with its own 3-band passive EQ, deliver the dynamic touch response of the Ironheart tube series without the maintenance. LA·IR cabinet-emulated XLR output, USB-C audio I/O, footswitchable Pre-Boost, and a Watts Control that drops output below 1 W make this combo equally at home on stage, in the studio, or in a bedroom.

  • 120 W RMS solid-state power section with switchable <1 W bedroom mode
  • Two independent channels: ASYM/Clean/SYM on CH1, Bright/Flat/Dark voicings on CH2
  • Custom HH H1260 16 Ohm speakers in an offset 2×12" cabinet for wide stage projection
  • LA·IR-equipped XLR DI out, USB-C audio I/O, FX loop, headphone output with cab emulation
Daljnji opis na tvom jeziku za sada nije dostupan. Možda će ti za sada pomoći opis na engleskom jeziku.

Flagship Ironheart Foundry Combo — 120 W of Tube-Feel Solid-State Power

The Laney IRF120-212 is the flagship of the Ironheart Foundry lineup — a 120-watt solid-state combo engineered to deliver the touch-sensitive response of Laney's Ironheart tube series in a lighter, maintenance-free package. An offset 2×12" cabinet loaded with custom HH H1260 loudspeakers provides the wide stage projection and tight low-end that high-gain players demand. Two fully independent channels, each with its own 3-band passive EQ, let rhythm and lead tones live on separate settings. This combo is the right choice for gigging guitarists who want Ironheart attitude in a single, road-ready rig.

What Sets the Ironheart Foundry Combo Apart

What separates this flagship from typical solid-state designs is the LA·IR platform — Laney's onboard impulse-response loader feeding a balanced XLR direct output with selectable cabinet emulations and a ground lift switch. A footswitchable Pre-Boost sits ahead of the gain stage, thickening saturation when the amp is already cooking or adding a clean volume lift when the channel is set low. A Watts Control attenuates the 120 W RMS power section down to a sub-1 W bedroom mode.

Power Section and Speaker Configuration

The power stage pairs serious wattage with a cabinet built for projection. The offset 2×12" layout places the speakers at different heights for a wider sweet spot, while the HH H1260 drivers were voiced specifically for the Foundry circuit.

  • Power Output: 120 W RMS — switchable to <1 W bedroom mode via the Watts Control
  • Speakers: 2x HH H1260, 16 Ohm — custom-voiced drivers in an offset cabinet layout
  • Cabinet dimensions of 552 x 661 x 271 mm (HWD) keep the combo at a manageable 18.6 kg

Two Independent Channels with Dedicated EQ

Channel architecture is where the Foundry combo earns its name. Each channel has its own 3-band passive EQ plus a unique voicing switch, so dialing in a saturated lead never disturbs a clean rhythm preset.

  • Channel 1 Gain Modes: ASYM / Clean / SYM — Clean preserves headroom for pedals, ASYM clips asymmetrically for warm organic breakup, SYM clips symmetrically for even harmonic saturation
  • Channel 2 Voicings: Bright / Flat / Dark — shapes the lead channel's frequency response before the EQ
  • Pre-Boost: Footswitchable with front-panel level control — adds a defined gain step on demand for solos and riff punches

Stage, Studio, and Silent Practice Connectivity

The Foundry combo is built for modern workflows, with pro-grade I/O that lets it sit at the centre of a rig without extra gear. The LA·IR-equipped XLR output sends cabinet-emulated tone directly to a PA or interface, while USB-C handles both audio I/O and app-based IR management.

  • DI Output: Balanced XLR with LA·IR cab emulation, IR selector, and ground lift — direct-to-PA without miking
  • USB-C: Audio I/O and LA·IR app connection — record directly to a DAW and load custom impulse responses
  • Practice I/O: 3.5 mm stereo headphone output with cabinet emulation, 3.5 mm stereo Aux In — silent practice and play-along sessions

Who the IRF120-212 Is Built For

The IRF120-212 is the right choice for working guitarists who need a single combo that handles gigs, rehearsals, and studio sessions without compromise. Players running high-gain tones — from drop-tuned metal rhythm to articulate 80s-style lead — will appreciate the channel-2 Bright/Flat/Dark voicings and the footswitchable Pre-Boost for pushing solos above the mix. The LA·IR XLR output and USB-C audio I/O make it equally attractive for home recordists who want to track without miking a cabinet, while the Watts Control and headphone output keep late-night practice neighbour-friendly.

Laney Ironheart Foundry — British Amp Heritage Since 1967

Laney Amplification was founded in 1967 when Lyndon Laney built his first amplifier for his own band, and the British company has spent decades refining both tube and solid-state designs for working musicians. The Ironheart line has long been associated with modern high-gain British tone, and the Foundry series translates that character into lighter, more practical combos and heads. The IRF120-212 is the flagship of that platform, endorsed and demoed by players including Josh Baines of Malevolence.

Namjena

Vrsta zvučnika

HH designed H1260

Opcije

Kanali

2

Zvučniki

2x 12 "

Broj ulaza

1

Efekt petlje

Da

Broj efekata

1

MIDI interface

Nije

Bluetooth

Nije

Svojstva

Snaga

120 W

Elektronika

Solid State

Cijevi - izlazno pojačalo

Solid State

Boja

Crna

Ulazi i izlazi

MP3 / linijski ulaz

Da

Ulazni priključak nožnog prekidača

Da

Izlaz za slušalice

Da

USB

Da

Konektor za zvučnik

Nije

DI izlaz

Da

Ulaz za mikrofon

Nije

Akustika

Snaga RMS (Watt)

120

Snaga RMS

120 W

Efekti

Reverb

Da

Ugrađeni efekti

Reverb

Pakiranje

Paket sadrži

Power Cable

Napajanje

Radi na baterije

Nije

Napajanje

100 - 240V

Oprema

Uključen nožni prekidač

Nije

Adapter uključen

Nije

Dimenzije i težina

Visina (cm)

55,2

Širina (cm)

66,1

Dubina (cm)

27,1

Težina

18,6 kg

Zemlja

Zemlja podrijetla

Kina

Dokumenti

Upute za uporabu
Informacije o proizvođaču
Proizvođač:
Laney
Steelpark Road, B62 8HD, Halesowen, Ujedinjeno Kraljevstvo
Odgovorna osoba:
Martin Pivoňka-Music Trade
Nová Ves 133,, 27752, Nová Ves u Melníka, Češka
Sigurnosne upute

Za odgovarajuće sigurnosne upute za proizvod pogledaj upute za uporabu