Odaberi državu za dostavu paketa

FiiO KA5 Hi-Fi Pojačala za slušalice

Kod proizvoda: 1337379

FiiO KA5 Hi-Fi Pojačala za slušalice

Kod proizvoda: 1337379

The FiiO KA5 White is a flagship portable USB-C DAC and headphone amplifier that delivers desktop-grade decoding from a dongle-sized chassis. Built around dual CS43198 DACs and ultra-low-noise op amps, it supports PCM 768 kHz/32-bit and DSD256 native playback for studio-quality sound on the go. The aluminum-alloy body houses a 4.4 mm balanced…

FiiO KA5 Hi-Fi Pojačala za slušalice

The FiiO KA5 White is a flagship portable USB-C DAC and headphone amplifier that delivers desktop-grade decoding from a dongle-sized chassis. Built around dual CS43198 DACs and ultra-low-noise op amps, it supports PCM 768 kHz/32-bit and DSD256 native playback for studio-quality sound on the go. The aluminum-alloy body houses a 4.4 mm balanced output, a 3.5 mm single-ended/S/PDIF socket, and an OLED display with onboard menu control in a compact 56.3 × 22 × 12 mm chassis weighing about 19 g.

  • Dual CS43198 DACs on a 6-layer immersion-gold PCB with ultra-low-noise op amps
  • Up to 265 mW per channel from the 4.4 mm balanced output at 32 Ω
  • Native PCM 768 kHz/32-bit and DSD256 decoding with five selectable digital filters
  • 4.4 mm balanced and 3.5 mm single-ended outputs, with the 3.5 mm port doubling as S/PDIF digital output
Daljnji opis na tvom jeziku za sada nije dostupan. Možda će ti za sada pomoći opis na engleskom jeziku.

Portable USB-C DAC and Headphone Amplifier With Desktop-Grade Decoding

The FiiO KA5 White is a flagship portable DAC and headphone amplifier that brings true high-resolution decoding to a dongle-sized form factor. Built around dual Cirrus Logic CS43198 DACs and ultra-low-noise op amps, it converts USB-C digital audio into a clean analog signal. With native PCM playback up to 768 kHz/32-bit and DSD256 plus 4.4 mm balanced and 3.5 mm single-ended outputs, this model is the right choice for audiophiles who want flagship decoding without carrying a desktop stack.

What Sets the KA5 Apart in the Dongle DAC Category

This model mounts its dual CS43198 DACs on a six-layer immersion-gold PCB, paired with high-performance ultra-low-noise op amps, while the OLED display shows the sampling rate and working state and the buttons handle menu selection, function settings, volume and track switching.

Dual CS43198 DACs With Native High-Resolution Decoding

The conversion stage is the heart of any DAC, and the KA5 packs two of Cirrus Logic's flagship CS43198 chips, rated at up to 128 dB SNR (4.4 mm output, 32 Ω, A-weighted).

  • DAC Chipset: Dual Cirrus Logic CS43198 — two DAC chips on a 6-layer immersion-gold PCB
  • Maximum Sample Rate: 768 kHz / 32-bit PCM, DSD256 native — covers studio-grade high-resolution formats without downsampling, plus five selectable digital filters

Balanced and Single-Ended Headphone Outputs With Real Driving Power

Its amplifier stage feeds both a 3.5 mm single-ended socket and a 4.4 mm balanced socket, with output impedance below 0.35 Ω on both ports to avoid coloring multi-driver IEMs.

  • 3.5 mm Output Power: 122 mW + 122 mW @ 32 Ω, 13.5 mW @ 300 Ω — drives most portable headphones cleanly from the single-ended socket
  • 4.4 mm Balanced Output Power: 265 mW + 265 mW @ 32 Ω, 54 mW @ 300 Ω — enough headroom for full-size dynamic cans and demanding IEMs

USB-C Input, S/PDIF Output, and a Pocket-Sized Aluminum Chassis

Connectivity runs through a USB-C input that supports both UAC 2.0 and UAC 1.0 modes, with a shared 3.5 mm S/PDIF output for legacy DAC chains. Bus-powered from the source device with no internal battery, the unit measures about 56.3 × 22 × 12 mm and weighs 19 g.

  • Digital Input: USB Type-C — plug-and-play with Android, iOS (via the included Type-C to Lightning OTG cable), Windows, and macOS
  • Headphone Outputs: 3.5 mm single-ended, 4.4 mm balanced — covers both common portable termination standards
  • Frequency Response: 20 Hz – 50 kHz — flat within 0.1 dB across 20 Hz – 20 kHz

For Audiophiles Who Want Flagship Decoding Without a Desktop Stack

This model is the right choice for listeners who already own a library of high-resolution files and want to hear them properly through a portable rig. It suits owners of full-size dynamic headphones in the 16–300 Ω range who need the extra current of the 4.4 mm balanced output, as well as IEM users who want a low-output-impedance source. The 3.5 mm port also works as an S/PDIF digital output for feeding an external DAC or receiver.

White Aluminium Body With Electrophoresis Finish

The aluminium-alloy body of the white version is electrophoresis-coated, giving a rigid layer that resists scratches and corrosion and does not easily age or discolor. Firmware can be updated over USB, and on Android devices the KA5 can also be set up in the FiiO Control app, including high/low gain, five digital filters, L/R channel balance and screen flip.

Namjena

Tip

DA Converter, Pojačalo za slušalice

Kompatibilno sa

Android, Windows, iOS, macOS

Opcije

Broj izlaza

2

THD

0,00037%

Podržani formati

PCM, DSD

WiFi

Nije

Bluetooth

Nije

DA Conversion

Da

Mikrofon

Nije

MIDI interface

Nije

Svojstva

Boja

Bijela

Raspon frekvencija

20 Hz - 50 kHz

Impedancija

16 Ohm, 300 Ohm

Frekvencija uzimanja uzoraka

768 kHz / 32 bit

Omjer signala i šuma

≥ 128dB

Zaslon

Da

Ulazi i izlazi

Ulazi

USB-C

USB

Da

S/PDIF

Da

Ulaz za mikrofon

Nije

Analogni ulazi

Nije

Izlaz za slušalice

Da (2 )

Konektori

Konektor tipa A

USB C

Napajanje

Radi na baterije

Nije

Napajanje

USB-C

Oprema

Adapter uključen

Nije

Dimenzije i težina

Visina (cm)

5,63

Širina (cm)

2,2

Dubina (cm)

1,2

Težina (g)

19

Zemlja

Zemlja podrijetla

Kina

Dokumenti

Upute za uporabu
Informacije o proizvođaču
Proizvođač:
Guangzhou FiiO Electronics Technology Co., Ltd.
No.21 Longliang Road, Xialiang Village, Longgui Street, Baiyun District, 510540, Guangzhou,Guangdong, Kina
Odgovorna osoba:
FiiO
Sigurnosne upute

Za odgovarajuće sigurnosne upute za proizvod pogledaj upute za uporabu